Famco Chimney Sweep Nationwide

Famco Chimney Sweep in Long Beach: What to Know First

A standard Famco chimney sweep in Long Beach typically runs $189 – $289, and most jobs are completed in 45 – 90 minutes with no mess left behind. We’re an independent Famco service provider – not manufacturer-authorized – which means we report what we actually find, not what pushes a parts sale. If your Famco unit is clean and sound, we’ll tell you that straight. To schedule or ask a question, call (562) 317-7262.

Call (562) 317-7262

This page is for Long Beach homeowners who own a Famco chimney system or appliance vent and want a sweep done right – by a crew that puts the price in writing before the first tool comes off the truck. We’ve been running sweeps and inspections across Long Beach for years, from Craftsman homes in Belmont Heights to newer builds near the waterfront.

How Famco Products Fail – and How We See It on the Job

Famco makes solid equipment. But every brand has weak points, and knowing them is what separates a real sweep from a guy with a brush. Here’s what we actually see on Famco jobs in Long Beach:

• Famco stainless steel chimney caps – screen clogging from marine-layer soot. Long Beach’s coastal air puts more moisture and salt into flue gas than inland homes deal with. That turns creosote into a sticky, faster-building residue. Famco caps with fine mesh screens catch this more aggressively, and we regularly pull caps on Long Beach jobs where the screen is 40 – 60% blocked. The fix is a full screen cleaning during the sweep – not a cap replacement.
• Famco anchor plate sealant breakdown on manufactured fireplace flues. On Famco anchor plates used with air-cooled chimney systems, the high-temperature sealant at the plate-to-flue junction dries out and cracks faster in Long Beach’s salt air. Symptom: you notice a faint smoke smell indoors after the fireplace has been running 20 – 30 minutes. We inspect that seal on every Famco sweep and reseal it as needed with high-temp sealant – usually a $45 – $75 add-on, not a full liner job.
• Famco direct-vent terminations with rust at the vent collar. Homes closer to the beach see accelerated surface rust where the vent passes through the exterior wall. It looks worse than it is. Most of the time, it’s a surface condition that wire-brushing and a coat of high-temp paint corrects. We’ll photograph it before and after so you have a record.
• Famco wood stove adapters – creosote buildup at the transition point. The point where a Famco stove adapter meets the connector pipe is a turbulence zone. Smoke slows down there, cools, and drops creosote. On Long Beach stoves burning pressed logs or less-than-dry cordwood, we see this transition point cake up faster than any other section of the flue. We hand-scrape that section rather than relying on a rotary brush alone.
• Famco rain caps with internal spark-arrestor screens – ember blockage. On chimneys that see wood fires three or more nights a week in winter, the spark arrestor screen accumulates fine ash and soot that hardens with moisture. Left alone, that screen blocks draft and pushes smoke back into the house. We remove, inspect, and clean the spark arrestor on every sweep – it’s included in the job, not an add-on.

Our Famco Chimney Sweep Process

Every Famco job follows the same discipline. No shortcuts, no surprises. Here’s how it runs from the first call to the final walk-through:

1. 1
   You call (562) 317-7262. A live person answers – 24 hours a day, 7 days a week. We book a window and a uniformed, background-checked technician shows up inside it.
2. 2
   We walk the job and write the price. Before any tool comes off the truck, you get a written price for the sweep and any evaluation work. The number on the invoice is the number you approved. No exceptions.
3. 3
   We prep the work area. Drop cloths go down around the fireplace or stove, floor protection in place, and the vacuum is running before the brush touches the flue.
4. 4
   The sweep itself. We brush the flue top to bottom (or bottom to top, depending on the setup), clean the smoke chamber, smoke shelf, damper assembly, and firebox. On Famco units, we hand-scrape transition points and coupling areas where creosote builds unevenly.
5. 5
   We inspect and photograph. After the sweep, we run a camera inspection so you can see the flue condition yourself. We don’t recommend liner work, cap replacement, or anything else without camera evidence you can review with us.
6. 6
   We write the report and guarantee the labor. You get a written inspection summary, photos, and the 365-Day Done Right Promise – if a covered repair fails within one full year, we return at no charge.

What Famco Chimney Sweep Costs in Long Beach

Here are the ranges we quote for Famco work in Long Beach:

• Standard Famco chimney sweep: $189 – $289 depending on flue height, accessibility, and how much creosote or soot accumulation is present.
• Sweep with cap screen cleaning (Famco cap with spark arrestor): included in the sweep price for accessible caps; $35 – $55 extra if the cap requires removal and re-securing on a steep roof.
• Anchor plate sealant repair (found during sweep): $45 – $75, using high-temp sealant.
• Camera inspection add-on (when not already included): $85 – $125, but if you’re getting a Level 2 inspection, the camera work is part of it.
• Level 1 Inspection: $125 – $175 – visual inspection of accessible areas, no special equipment needed.
• Level 2 Inspection: $225 – $375 – camera inspection of the full flue, required when property changes hands, after a chimney fire, or after an earthquake (relevant in Long Beach).

What moves the price? Flue height, roof pitch, whether your Famco component is on a manufactured fireplace or a masonry chimney, and how long it’s been since the last sweep. Heavy creosote (glazed, thick tar) takes longer to remove safely. You’ll always know the exact number before work begins. Call (562) 317-7262 for a free estimate.

Why Long Beach Homeowners Call Flint Chimney Co Long Beach for Famco Work

We’re part of the Garrison Partners family, founded in 2002, and we operate under The Garrison Standard: every job gets a written price, every repair carries the 365-Day Done Right Promise in writing, and every tech who shows up is background-checked and in uniform. When we work on a Famco chimney system, we’re also familiar with the other brands that show up in the same setup – DuraFlex liners, HeatShield repair materials, and Gelco caps – so when we recommend a repair, we specify the right material for the job, not whatever’s on sale at the supply house.

Hank Delano built this business on showing up on time and giving a straight report. He grew up in Los Angeles, learned the trade at Los Angeles Trade-Technical College, and has spent the better part of two decades doing chimney work across Southern California. His rule: clean flue, honest report – that’s the whole job. If your Famco unit is fine, you’ll hear it from us.

FAQs