Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Artesia, CA
Chimney work in Artesia runs into the same thing on nearly every street: original masonry chimneys on ranch and Spanish-influenced homes built between the 1940s and 1970s, most of which have never had a camera inspection. The mild coastal climate means fireplaces get used occasionally, not heavily, and that changes the kind of buildup we find. Artesia homeowners call us because they want a written price before any work starts and a crew that shows up inside the window given. That’s how Flint Chimney Co Long Beach runs every job in Artesia. Call (562) 317-7262 for a free estimate.
Why Artesia Homes Are Different
Artesia’s housing stock is mostly single-family detached homes from the mid-century decades, and a lot of those chimneys are original. That means aging mortar joints, cracked flue tiles, and dampers that have rusted in place from decades of marine-layer moisture. We don’t treat these chimneys the same way we’d treat a newer prefab unit in a condo complex. Older brick and tile needs a sweep method that removes creosote without grinding away already-softened mortar.
The climate plays a bigger role than most people expect. Artesia gets mild, wet winters and long dry summers, so fireplaces sit unused for months at a time. When they do get lit, it’s often for an hour or two on a cool evening, not as a primary heat source. Low-temperature fires produce tarry, sticky creosote that clings to flue walls rather than burning off as dry soot. Coastal humidity then works into any small crack in the crown or brick, and spalling brick faces and moisture-damaged flue tiles end up being the real problem. The homes here don’t usually have heavy soot loading. They have slow, quiet water damage, and the only way to see it is with a camera pushed down the flue.
Our crew knows the difference between a chimney that needs a cleaning and one that needs masonry repair before it gets worse. In Artesia, that distinction matters more than in most cities we work.
Styles & brands we work with
Our Main Artesia Services
Most calls from Artesia homeowners fall into two buckets: a standard sweep when the fireplace hasn’t been touched in years, or an inspection because someone saw cracked brick or water staining near the ceiling. Here’s what each one involves.
Chimney Sweep in Artesia
A sweep in Artesia usually means removing tarry, glazed creosote rather than loose soot, because the fires here burn low and cool. We run rotary brushes suited to older masonry flues and clean the smoke chamber, damper, and firebox. Drop cloths go down before any tool comes off the truck, and the work area is left clean. If your fireplace has been dormant for a few seasons, this is the job that gets it ready to burn safely again. See the full breakdown on our Chimney Sweep in Artesia page.
Chimney Inspection in Artesia
An inspection in Artesia is the only way to know whether that hairline crack in the brick is cosmetic or a water-intrusion problem. We use a camera to look at the full length of the flue, and we photograph what we find. You get the images, not just a verbal summary. Given how many Artesia chimneys date back to the original build and have never been inspected, we recommend a Level 2 camera inspection before any major repair quote. Details are on our Chimney Inspection in Artesia page.
Chimney Repair in Artesia
Repair work in Artesia often comes down to spalling brick, cracked flue liners, or dampers that have rusted shut. We quote a written price before work starts, and every repair carries our 365-Day Done Right Promise: if a covered repair fails within a year, we return at no charge. We don’t tell you a liner needs replacing unless the camera footage shows it. Read more on our Chimney Repair in Artesia page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Artesia
We work with chimneys and components from Olympia Chimney, Famco, and Copperfield, among others. When a replacement part is needed, we spec the right brand for the job rather than whatever is cheapest to stock. Common parts for Artesia’s older masonry chimneys are typically available quickly through our normal supply channels. Browse our brands to see the full list of what we install and service.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Artesia, CA
| Service | Typical range in Artesia |
|---|---|
| Standard chimney sweep (open fireplace) | $189 – $289 |
| Chimney sweep with glaze removal (Level 2 creosote) | $350 – $575 |
| Level 1 inspection | $129 – $199 |
| Level 2 camera inspection | $249 – $375 |
| Damper replacement (standard cast iron) | $220 – $350 |
| Top-sealing damper installation | $450 – $675 |
| Flue cap installation | $175 – $325 |
| Chimney crown repair (minor) | $300 – $550 |
| Masonry repointing (per 10 sq ft) | $400 – $650 |
| Smoke chamber parging | $900 – $1,500 |
What pushes a price up in Artesia is usually one of two things: heavy tar buildup that requires a chemical or mechanical glaze removal, or masonry that has absorbed enough moisture to need repointing before the structural integrity is restored. Whatever the number is, you’ll see it in writing before any work begins. The price we quote is the price you approve. No additions at the door.
Neighborhoods We Serve in Artesia
We cover all of Artesia, including the older ranch neighborhoods where mid-century masonry chimneys are the norm. Our scheduling is coordinated from the Los Angeles office, so when you call, a live person answers and gets you on the calendar.
- Central Artesia (Pioneer Blvd corridor)
- Artesia Gardens / Historic Ranch District
- Dolly Varden neighborhood
- Gramercy Park area
- North Artesia (near Cerritos border)
Service Area – Cities Near Artesia
Our crews also serve homeowners in neighboring cities with the same written-price policy and 365-Day Done Right Promise. If you’re just outside Artesia, we likely cover your street too. See our pages for Cerritos, CA, Norwalk, CA, Bellflower, CA, and Cypress, CA.
Serving Artesia, CA - Our Local Coverage Area
We’re based in the Artesia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Artesia
Most Artesia sweeps and inspections are scheduled within a few business days. We run set appointment windows and show up inside the window given. Call (562) 317-7262 and a live person will give you real availability.
Routine chimney sweeping and Level 1 or Level 2 inspections don’t require permits. Some structural repairs or full rebuilds can trigger permit requirements depending on scope. We’ll tell you straight if your repair falls into that category, and we handle the paperwork when it does.
Yes. Our crews serve every neighborhood in Artesia, and we schedule from the Los Angeles office. If you’re near the Cerritos or Norwalk line, you’re still in our normal area. Call for exact scheduling.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Artesia Customers Say
"Direct, no nonsense, and polite. Exactly what I wanted."
- Tina W."Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M."Good work on the damper replacement. Had to wait for a part for a few days, but they stayed in touch."
- Glenn D.