Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Artesia
A standard Level 1 chimney inspection in Artesia typically runs $149 – $249, while a Level 2 inspection with camera work usually lands between $299 – $499 depending on the flue’s condition and access. Most Artesia inspections are completed in under 90 minutes, and you’ll get a written report with photos before we leave the driveway. If you’re buying or selling a home near Pioneer Boulevard or anywhere else in Artesia, call (562) 317-7262 and we’ll schedule around your closing date.
We’ve been inspecting chimneys in Artesia long enough to know the housing stock block by block, from the 1950s ranch homes east of Norwalk Boulevard to the Spanish-influenced builds near Cerritos. What that means for you: we already know your chimney was likely built with clay tile and bedded in mortar that’s now sixty or seventy years old. We bring the camera gear that shows you exactly what that aging has done, not just a guess from looking up the flue with a flashlight.
Why Flint Chimney Co Long Beach Is Artesia’s Preferred Chimney Inspection Company
Hank Delano runs Flint Chimney Co Long Beach under The Garrison Standard, the same operating code every Garrison Partners location follows since 2002. That means every Artesia inspection gets a written price before any tool comes off the truck, and every repair we recommend carries a 365-Day Done Right Promise in writing. You’ll know the number on the invoice before you approve the work. No exceptions.
Artesia homeowners call us because a live person answers the phone 24/7, and because our technicians show up in uniform, background-checked, and inside the window we gave you. Dispatch is coordinated from the brand’s Los Angeles office, but our crews serve Artesia directly, so scheduling doesn’t route you through a call center maze. The tech who inspects your chimney is the same one who walks you through the camera footage on the spot.
Our reputation in Artesia is built on one thing: we show you the evidence. When we flag a cracked flue liner, you watch the video over our shoulder. When we say a repair can wait, we tell you that too. That’s why the most common feedback we get from Artesia customers is that they finally knew exactly what they were paying for.
Styles & brands we work with





Chimney Leak in Artesia
A Chimney Leak in Artesia is almost never a single obvious hole. It’s usually a slow, compounding problem: a hairline crack in the crown lets rain through, the flashing around the roofline has pulled loose after decades of marine layer exposure, or water is wicking through spalled brick and into the firebox. In Artesia’s older ranch homes, water intrusion is the number one driver of chimney damage, because moisture from the frequent marine layer and intermittent winter rains sits on masonry and finds every weak point.
What a Chimney Inspection for a leak involves is locating the entry point, not just pointing at a damp spot. We water-test the crown, check the flashing seams, and run a camera down the flue to see whether water has reached the smoke shelf or firebox. A leak inspection in Artesia typically runs $249 – $449 depending on whether we’re on the roof, in the attic, or running the camera through the full flue. If you’re seeing water in the firebox after a winter rain, that’s a call worth making before the next one.
Finding the source, not the symptom
We’ve seen too many Artesia chimneys get a fresh coat of crown sealant thrown on top of a flashing leak that’s actually at the roofline. That repair fails, and the homeowner pays for the same leak twice. Our process is to inspect the full water path and write down exactly where the breach is before recommending any fix.
What a leak inspection costs
Expect $249 – $449 for a full leak investigation with camera confirmation. If we find a simple crown crack, the repair may be under $400. If the flashing needs replacement and the underlying brick is spalled, we’ll quote that separately with a written price you see before any work begins.
Chimney Camera Inspection in Artesia
A Chimney Camera Inspection in Artesia is the only way to see what’s happening behind the brick of a 1950s or 1960s flue. We run a push-rod camera down the chimney and record the full length of the flue, from the cap down through the smoke chamber to the firebox. You watch the live feed with us and we hand you the stills, so there’s no mystery about what’s cracked, spalling, or clogged.
In Artesia, most chimneys have never had a camera inspection, which is exactly why this matters. A visual-only sweep can’t see hairline cracks in a clay-tile liner or a shifted tile at the smoke chamber. The camera shows that in real time. A camera inspection in Artesia runs $199 – $349 as a standalone service, and it’s included in every Level 2 inspection we perform. For homeowners with older masonry chimneys, this is the single most useful diagnostic we offer.
Live footage on the spot
We don’t take photos back to the truck and call you with a verdict later. You watch the camera feed with us, and we point out exactly what we’re seeing. If a tile has spalled, you’ll see the chunk missing. If a crack runs through the liner, you’ll see it on the monitor before we write anything down.
When Artesia homeowners should get one
Any house built between the 1940s and 1970s here should have a camera inspection before the first fire of the season if it’s never been done. Also after any seismic tremor, after any water stain appears on the ceiling near the chimney, or before you buy or sell. A camera inspection on a mid-century Artesia chimney finds issues that visual checks miss, and it’s the only way to make an informed repair decision.
Trusted Brands We Service in Artesia
We work with professional-grade chimney materials from Olympia Chimney, Famco, and Copperfield, and when an Artesia inspection turns up a cracked clay-tile liner, we can quote a HeatShield resurfacing that uses the existing tile as the structural base. That matters for mid-century masonry chimneys: a full stainless liner is sometimes the answer, but often the less invasive resurfacing is what the flue actually needs. We keep the materials and parts our Artesia customers most often need in local stock rotation, which means most repair work can be scheduled quickly once your inspection gives us a clear diagnosis. You’ll never pay for a brand-name upsell we can’t justify with camera footage.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Artesia Homes
- Spalled brick and cracked clay-tile flue liners from moisture intrusion. The frequent marine layer and intermittent winter rains soak into older masonry, and when water freezes or expands, the face of the brick pops off and the tile behind it cracks. This is the most common inspection finding in Artesia ranch homes, and it’s almost always invisible without a camera.
- Rusted dampers from coastal humidity. Even chimneys that rarely see fire get rusted dampers here because the air is damp year round. A rusted damper that won’t fully close lets conditioned air escape, and it often seizes in the open position where heat pours out all winter.
- Unlined or partially lined flues in 1940s and 1950s builds. Many original Artesia chimneys were built without a proper flue liner or with clay tile that has since deteriorated. Running a fireplace in an unlined chimney is a fire risk, and venting a gas appliance into one is a carbon monoxide risk. This is the single most common upselling trap in the chimney industry, and it’s why we never recommend a liner without camera evidence you can see.
- Shifting flue tiles after minor seismic activity. Even small tremors can knock a clay tile out of alignment at the smoke chamber. If not caught, the next fire can push smoke back into the room or let heat reach combustible framing. A Level 2 camera inspection catches this before it becomes a draft reversal on a cold Artesia evening.
Pricing for Chimney Inspection in Artesia, CA
A Level 1 inspection in Artesia runs $149 – $249 and is the right call when your chimney is in regular use and nothing has changed. A Level 2 inspection, which includes camera work and is required for real estate transactions, runs $299 – $499. If we’re chasing a leak or diagnosing a draft problem, the inspection lands in the $249 – $449 range depending on roof access and how far up the flue we need to run the camera. What changes the price is not mystery, it’s access: roof pitch, attic clearance, and whether the flue needs a full camera pass or just a visual check. Call (562) 317-7262 for a written quote and we’ll tell you the exact number before we book the appointment. Estimates are free.
We Also Serve Cities Near Artesia
Flint Chimney Co Long Beach provides Chimney Inspection in Artesia and the surrounding communities, including Cerritos, Norwalk, Bellflower, and Cypress. If you’re just over the city line, the same written pricing, camera-first process, and 365-Day Done Right Promise applies. Call and ask for Hank’s team.
Serving Artesia, CA - Our Local Coverage Area
We’re based in the Artesia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Artesia
Rust on the damper comes from moisture, not fire. Artesia’s coastal humidity and the marine layer push damp air into the chimney year round, and when that moisture condenses on the metal damper, it rusts. A rusted damper is usually a symptom of a larger moisture issue, whether that’s a cracked crown, failed flashing, or a flue that’s pulling damp air down from the top. Start with a camera inspection to find where the moisture is entering. Call (562) 317-7262 and we’ll schedule it.
Yes, and it’s not because of soot. Infrequent fires in a mid-century Artesia chimney produce less creosote, but the clay-tile liner is still sixty years old, and moisture intrusion over those decades causes cracks that no visual check can see. A camera inspection tells you whether the flue is safe to burn at all. For $199 – $349, you’ll know for certain. Call (562) 317-7262 to book one.
Sometimes yes, and that’s exactly what the camera footage determines. HeatShield resurfaces the existing clay-tile flue with a ceramic coating, which preserves the original masonry structure and is less invasive than demolishing and relining with stainless. It’s often the right fix for a mid-century Artesia chimney with localized tile spalling. But if the flue is severely cracked or shifted, a stainless liner from a brand like Olympia Chimney or Copperfield may be the only safe option. We don’t recommend one over the other until we’ve shown you the video. Call (562) 317-7262 for an inspection that includes the camera pass.
If water appears in the firebox after rain, the entry point is usually the chimney crown, the flashing, or both. A crown with hairline cracks lets water drip down into the masonry and eventually into the firebox, while failed flashing lets water run along the roof line and behind the brick. The only way to know which one is your leak is to inspect both, and a water test plus camera pass will pinpoint it. That inspection runs $249 – $449. Call (562) 317-7262 and we’ll tell you exactly where the water is getting in.
A Level 1 is a visual check of the accessible parts of the chimney, the firebox, and the flue from above and below, and it’s $149 – $249 in Artesia. A Level 2 is everything in a Level 1 plus a full camera scan of the flue interior, including the smoke chamber and the parts you can’t see from the roof or the hearth, and it’s $299 – $499. For an older Artesia home built between the 1940s and 1970s, we recommend a Level 2 at least once, because it’s the only way to document the condition of the clay-tile liner. If you’re buying or selling, the real estate transaction will require it. Call (562) 317-7262 and we’ll get it scheduled.
On a 1950s ranch near Pioneer Boulevard, our tech found a firebox with hairline cracks and a clay-tile flue liner that had spalled in three places, all invisible from the roof. We ran a camera inspection with a push-rod camera, showed the homeowner the live footage of crumbling tile at the smoke chamber shelf, and recommended HeatShield resurfacing rather than a full rebuild. No upsell, just the video evidence they could see themselves.
If your chimney in Artesia has never had a camera inspection, or if you’re seeing water stains, draft problems, or just wondering whether it’s safe to light a fire, call (562) 317-7262. We’ll give you a written price before we arrive, show you the footage while we work, and hand you a report you can keep. A live person answers the phone now.
Written by Hank Delano, Owner at Flint Chimney Co Long Beach, serving Artesia, CA under The Garrison Standard since 2002.